Skip to main content

Anode Material for Lithium-ion Battery BIOHARDCARBON KURANODE™

Top Image: Bio‑hard carbon KURANODE™

Main Features of KURANODE™

KURANODE™ is anode material classified in hard carbon, used for lithium-ion battery. It is made from ecofriendly natural plant as raw material. Hard carbon including KURANODE™ has better input and output performances, cycle performance and low temperature performance than graphite which is broadly used as anode material. Moreover, KURANODE™ has cost competitiveness and good handling property (less moisture absorption) incomparison with traditional hard carbon.

Features of Hard Carbon: Charge–discharge performance, Recyclability, Low‑temperature performance
Plus symbol
Additional Features: Excellent cost performance, Low moisture absorption (compatible with water‑based binders)


Especially suitable for applications requiring regeneration capabilitysuch as automobile use.


Suitable as an anode material not only for lithium-ion batteries (LIBs) but also for lithium-ion capacitors (LICs) and sodium-ion batteries (SIBs / NaIBs).


Usable with water based binder (e.g. SBR/CMC) as well as solvent based binder (e.g. PVDF) thanks to its high moisture resistance.

Low Temperature Performance

Charge rate property at -20℃

Graph: Charge rate property at -20℃

Discharge rate property at -20℃

Graph: Discharge rate property at -20℃
Even at low temperatures where graphite cannot charge or discharge, KURANODE® is capable of stable charge–discharge performance, including under high‑rate conditions.

HPPC

(Hybrid Pulse Power Characterization)

■ Cathode: NCM ■ Cell: Laminate type ■ Temperature: 25℃
■ Plotted maximum input/output pulse power for 10s of each SOC ■ Measured by Kuraray

Graph: Hybrid Pulse Power Characterization
Compared with graphite, which is commonly used as a negative‑electrode material, hard carbon offers superior charge–discharge (input/output) performance.

Grade/Properties

GradeType 1Type 2 (9 μm)Type 2 (5 μm)
Average Particle size
D50
μm995
Specific Surface Area
SSA
m2/g446
Interlayer spacing
d002
nm0.380.380.38

Type 1 is high capacity type and Type 2 is low moisture absorbency type. These values (measured by Kuraray) are only for reference and are not guaranteed.

Contact Us

Contact us for product inquiries.

Icon: Contact Us